Tessaro Collective Tessaro Collective
Challenges we solve

Tell us what you’re noticing. We’ll find what’s causing it.

Each problem below has a root cause we can measure and a coordinated fix we can design. Most properties have more than one.

Energy

HVAC working harder than it needs to

What you notice
  • Long run times and rising cooling bills
  • Rooms that never quite reach setpoint
  • Units that age faster than expected

Read more →

What’s usually happening

Fans and compressors often run longer and harder than the space requires, and compressor oil gradually coats coil tubes, cutting heat transfer a little more every year.

What we design

  • Adaptive HVAC controls that match fan run time and speed to actual demand
  • Coil restoration that clears oil fouling and restores heat transfer
  • High-efficiency fan and blower motors with variable speed
7–21%
Lower HVAC energy in documented testing
Independent laboratory testing and field results
Energy

Dirty power and failing equipment

What you notice
  • Nuisance trips and hot electrical panels
  • Motors, drives, and controls failing early
  • Power factor penalties on your bill

Read more →

What’s usually happening

Modern equipment creates harmonics and phase imbalance. That extra current turns into heat, wear, and wasted kWh at every panel.

What we design

  • Passive power quality filtering at each panel
  • Facility power conditioning for phase balance, power factor, and transient protection
  • Engineering from your bills, interval data, and one-line diagram
12.5%
Lower kWh at a university athletic center over a 14-month measured study
7–12%+ typical in commercial applications
Energy

Refrigeration that never rests

What you notice
  • Walk-ins and freezers cycling constantly
  • Slow recovery after deliveries and door openings
  • Spoilage and temperature swings

Read more →

What’s usually happening

Every door opening loads heat into the room, and the compressor carries all of it in real time. That drives runtime, wear, and peak demand.

What we design

  • Ceiling-mounted thermal energy storage that carries part of the cooling load
  • High-efficiency evaporator fan motors
  • Room-by-room assessment of size, setpoint, and usage
25–50%
Project-specific refrigeration energy savings; 29% lower peak demand in a warehouse study
Validated by site measurement
Cold storage technology in partnership withGreentek
Water

Water bills that keep climbing

What you notice
  • Usage that doesn’t track with occupancy
  • Banging pipes and pressure swings
  • Leaks and worn fixtures, pumps, and heaters

Read more →

What’s usually happening

Pressure spikes and air trapped in the line inflate what the meter records and stress every pipe, valve, and fixture downstream.

What we design

  • Flow conditioning at the meter that stabilizes pressure and removes entrained air
  • No change in pressure or flow at the fixture
  • Optional analytics for leak alerts and portfolio reporting
15–35%
Lower water and sewer use, depending on system design and demand
34% at a 200+ room hotel; 28.5% at a student housing community
Indoor air

Odors, mold, and allergens

What you notice
  • Odor complaints in rooms and common areas
  • Musty smells after leaks or floods
  • Dust, allergens, and stale-feeling air

Read more →

What’s usually happening

Odors, mold, and allergens feed on organic matter that builds up on surfaces and inside ductwork. Masking products don’t remove it.

What we design

  • Continuous probiotic environmental control delivered through the HVAC system
  • Initial whole-building fogging where needed
  • Chemical-free, with no fumes or residues
90%+
Reported odor elimination after 30 days in a 24-facility study
76.3% reduction in biofilm biomass in the same study
All practice areas

Savings you can’t see

What you notice
  • Past projects that never showed up on the bill
  • No baseline to compare against
  • No one accountable after install

Read more →

What’s usually happening

Without a baseline and measurement plan, savings are a guess. Most vendors leave once the equipment is installed.

What we design

  • A baseline from 12 months of bills and interval data
  • Commissioning readings at installation
  • Before-and-after comparison against utility data
Every
Tessaro proposal includes a site-specific estimate and a verification plan
Measured against your own bills

Outcomes are documented results from case studies and independent testing. Results vary with property, equipment, operations, and utility rates. Every Tessaro proposal includes a site-specific estimate and a verification plan. Indoor air treatment is a probiotic cleaner and deodorizer; it is not intended to treat or prevent any disease.

Not sure which one it is? That’s what the first call is for.